Parameters required when transmitting a frame. More...

#include <zpal_radio.h>

Data Fields
zpal_radio_speed_t	speed
	Channel Speed to use when transmitting a frame.

zpal_radio_zwave_channel_t	channel_id
	Channel id to use when transmitting a frame.

zpal_radio_crc_t	crc
	CRC Type to use. XOR is used in 2 channel at 9600 and 40k baud rate. CRC CCITT is used in 100k frames.

uint8_t	preamble
	The byte value used for the preamble sequence.

uint8_t	preamble_length
	Length of the preamble. Minimum preamble length is specified in ITU G.9959-2015.

uint8_t	start_of_frame
	The start of frame byte used to indicate the end of preamble and the start of frame.

uint8_t	repeats
	Number of repetitions for the frame. This is used for wakeup beams where the beam is to be repeated for 250 or 1000 ms.

Detailed Description

Parameters required when transmitting a frame.

Field Documentation

zpal_radio_zwave_channel_t zpal_radio_transmit_parameter_t::channel_id

Channel id to use when transmitting a frame.

zpal_radio_crc_t zpal_radio_transmit_parameter_t::crc

CRC Type to use. XOR is used in 2 channel at 9600 and 40k baud rate. CRC CCITT is used in 100k frames.

uint8_t zpal_radio_transmit_parameter_t::preamble

The byte value used for the preamble sequence.

uint8_t zpal_radio_transmit_parameter_t::preamble_length

Length of the preamble. Minimum preamble length is specified in ITU G.9959-2015.

uint8_t zpal_radio_transmit_parameter_t::repeats

Number of repetitions for the frame. This is used for wakeup beams where the beam is to be repeated for 250 or 1000 ms.

zpal_radio_speed_t zpal_radio_transmit_parameter_t::speed

Channel Speed to use when transmitting a frame.

uint8_t zpal_radio_transmit_parameter_t::start_of_frame

The start of frame byte used to indicate the end of preamble and the start of frame.

The documentation for this struct was generated from the following file:

Trident IoT Z-Wave SDK